Skip to main content

SELECTING RIGHT TYPE OF PAINT FOR YOUR PROJECT



We underestimate the complexity of paint selection when budgeting to paint our property until it’s required we visit a paint store closer to you, then you become confused what sort of paint u actually need for your property and its mode of application, what oil and water based paint is, any painting problems ?, etc.

Paints are thin coatings applied (in stages) to clean surface and are in liquid form, but its expected to become dry, flexible solids, providing cleanable surfaces that help keep the substrates clean. Paint is named after their respective functions, binder or medium, pigments look. But the common classification is when paints are named after their function, e.g. primers, finishing coats, sanding sealer,fillers,floor paint, galvanized iron primer,surfacers,stoving paint, spray paint,undercoats,stainer,knifing compounds, roof paint sealers, etc.


OIL PAINT:

This is a type of slow-drying paint that consist of particles of pigments suspended in a drying oil, its viscosity may be modified by the addition of solvents such as white spirit,kero, etc.common applications of oil paint are in finishing and protection of wood in buildings and exposed metal structures

·         They are water and weather proof.
·         Proven to be a reliable in coating
·         Provides good finishes with no brush marks
·         Provides for higher aesthetics values as it’s easily clean
·         Use to stop capillary rise, stop rusting in metals,
·         Use as protector where there is high tendency of wall staining or damaged due to human/environmental factors.


WATER PAINT:

This is a type of fast-drying paint, a substance used as a coating to protect or decorate a clean surface (a mixture of pigment suspended in liquid), dries to form a hard coating.
Water paint can be further grouped into Emulsion paints (UK) and Latex paints (USA).


Emulsion paint:

·         These are paints generally used for interior decoration, also for exterior in some scenario
·         For painting wall or ceilings,
·         They are water based,
·         Easy to apply, cover large areas,
·         Durable, long life span,
·         Can be easily wash and replace,
·         Can be paint on any surface be it brick to cement, plaster work to lining papered walls
·         Water evaporates and coating hardens after applications



Latex paints:

·         This is water soluble paint, on application, the water evaporates and sticky globules adhere together
·         It has fast drying time
·         Easy to apply
·         It has no offensive odour
·         It brushes are easily cleaned
·         Its coverage greatly affected by amounts of pigments used
·         There is little or no difference between latex and acrylic paints because there is no latex in latex paint, its simply a generic label


Difference between emulsion paint and latex paint:

They are essentially the same, just different names from different areas or region.


Paint application tools

Paint brushes, rollers, spray application tools and pads


Other special types of paint

·         Anti fungus paint
·         Fire retardant paint
·         Relief texture paint
·         Heat resistant paint

·         Multi-colored finish paint





Pleases don’t just Read but Recommend, Share to others, and kindly leave comments below for others to follow
Labels:

Comments

Post a Comment

Popular posts from this blog

Construction Procedure of Surface Road Side Drainage-PART 1 (with picture)

Surface water ( i.e., rain water) that falls on the ground surface such as; open field, paved areas or road surface, roof tops etc are channeled to a main drain naturally or through a constructed channel which is referred to as drainage. Procedure for construction of a common drainage (trench) (1m x 1m U drainage) (reinforced). includes; I.       Marking Of Alignment: The surveyor marked out the alignment for the trench to be dug. II.       Digging/Excavation: The surveyor marked out the dept of the trench to be excavated with a mechanical excavating machine. For a 1m x 1m drainage, the mathematical process of obtaining the required dept is to sum together the dept of the required drain + base + blinding. For dept:  A drain of dept1000 mm, base of 150 mm and blinding of 50 mm. Hence 1000mm + 150mm + 50mm = 1200mm (1.2 m) So an excavation of 1200mm (1.2m) is required from the to level of the road surface. For width:
Post a Comment
Read more

Construction Procedure of Surface Road Side Drainage-PART 2 (with picture)

  V.        Next step is laying of concrete base on the blinded surface and the positioned reinforcement. A concrete base of 150 mm is to be laid or cast on the blinded floor, concrete grade C20 of ratio 1:2:4 is allowed (See concrete grading and mix ratio). A guiding panel is placed into position to guild in the laying of the concrete base in order to achieve a uniformly alignment base edge, thickness and width, also to manage concrete material while pouring. The base is cast with the U shape reinforcement bottom in between the concrete base achieving concrete cover below and above.   VI.        After setting and drying of the concrete base, next is to position the side wall panel form work. The floor base is marked to give the required one meter (1000 mm) internal width where the panel will be positioned. The panel wall spacing is 100mm, and wall height of 1000mm (1 meter), the panel is lubricated, clipped and prepared to accept the Concrete.
Post a Comment
Read more

Ring / Pipe Culverts Construction procedure

Culvert is an open/close drain structure that allows water to flow below a road. It’s like a tunnel carrying a stream of water flow. A Ring/Pipe Culvert Procedure for construction of a common Ring/Pipe Culvert (road junction culvert) includes; I.       Marking Of Alignment: - The surveyor marked out the alignment for the trench to be dug. II.       Digging/Excavation: The surveyor marked out the dept of the culvert to be excavated with an excavating machine. For a 1m pipe culvert, the mathematical process of obtaining the required dept is to sum together the total width of the pipe + base + blinding. For dept:  A pipe of width 1000 mm, base of 150 mm and blinding of 50 mm (though optional). . Hence 1000mm + 150mm + 50mm = 1200mm (1.2 m) So an excavation of 1200mm (1.2m) is required from the to level of the natural ground (sub grade level) surface. For width: A minimum of (2.5 x width) m is advisable.  
Post a Comment
Read more